Close
  • Actuator

    A power device that converts energy into a torque using the rotational force of a motor

    Actuator

  • BLDC Motor

    Electric motor powered by a direct current voltage supply and commutated electronically instead of by brushes like in conventional DC motors

    BLDC Motor

  • ECU

    Electronic Control Unit

    ECU

  • PTC Heater

    Device is for auxiliary heating system that heats up the air by electrical energy for diesel vehicles

    PTC Heater

  • Product
    Product

    An automotive electronic components such as Motor Actuator, PTC Heater, ECU, BLDC Motor etc

    Product

  • Company
    Company

    To satisfy customers, ADDTEC will maintain the highest technical skills and the best product management and on the basis of this, ADDTEC will challenge to the best enterprise value.

    Company

  • Career
    Career

    We foster talented people by focusing on challenges for the future, self-development, and constant innovation.

    Career


HVAC Actuator
Motor actuators control a damper in HVAC system to control air temperature, wind direction and air circulation mode(inside/outside)

  • 9
    • ANI-M1

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16 DC 16 ~ 32
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) USER SPEC
      • Noise (dB) 36
      • Stall Torque (N.cm) 150 ~ 200
      • RPM (No Load) 3.0 ~ 4.0
      • Size (mm) 50 x 80 x 28
      • Weight (g) 110
  • 8
    • ANI-M2

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16 DC 16 ~ 32
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 125 / 75
      • Noise (dB) 36
      • Stall Torque (N.cm) 180 ~ 210
      • RPM (No Load) 3.5
      • Size (mm) 71 × 95 × 28
      • Weight (g) 90

  • 7
    • ANI-M3

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) USER SPEC
      • Noise (dB) 36
      • Stall Torque (N.cm) 150 ~ 200
      • RPM (No Load) 3.0 ~ 4.0
      • Size (mm) 65 × 90 × 30
      • Weight (g) 110
  • 6
    • ANI-M4

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 80
      • Noise (dB) 43
      • Stall Torque (N.cm) Below 300
      • RPM (No Load) Below 2.0
      • Size (mm) 90 x 100 x 28
      • Weight (g) 140

  • 5
    • ANI-M5

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 125
      • Noise (dB) 43
      • Stall Torque (N.cm) Below 200
      • RPM (No Load) Below 2.0
      • Size (mm) 80 x 90 x 30
      • Weight (g) 140
  • 4
    • ANI-M6

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 360
      • Noise (dB) 50
      • Stall Torque (N.cm) Over 120
      • RPM (No Load) Over 2.0
      • Size (mm) 69 × 90 × 46
      • Weight (g) 108

  • 3
    • ANI-M9

      HVAC Actuator

      에어컨으로부터의 공기 온도, 공기 순환을 제어하고 HVAC의 Damper를 조절하여 송풍 방향 제어

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 360
      • Noise (dB) 40
      • Stall Torque (N.cm) Below 350
      • RPM (No Load) Below 1.5
      • Size (mm) 98.7 × 67.5 × 22.5
      • Weight (g) 105
  • 2
    • ANI-M10

      HVAC Actuator

      • Operation Voltage (V) DC 9 ~ 16
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 100
      • Noise (dB) 50
      • Stall Torque (N.cm) 200
      • RPM (No Load) 4
      • Size (mm) 93.5 × 90.9 × 41.5
      • Weight (g) 113

  • 1
    • ANI-M11

      HVAC Actuator

      • Operation Voltage (V) DC 19 ~ 28
      • Operation Temperature (℃) -40 ~ +85
      • Output Angle (°) 183
      • Noise (dB) 43
      • Stall Torque (N.cm) 70
      • RPM (No Load) 8.8
      • Size (mm) 87.5 × 63.3 × 50.5
      • Weight (g) 120